Richard Mille RM056-02 KV Factory Skeleton Dial

Description

KV Factory replica Richard Mille RM056-02 Skeleton Dial watch, the case mirror is made of sapphire crystal, and the three-layer case has extreme perspective aesthetic feeling and wear resistance, with strong sense of future technology. The watch case alone requires 40 days of continuous processing day and night, followed by 400 hours of processing and detailed decoration to complete the manufacture of the bridge plate of the movement. This incomparable labor cost obviously reflects the complexity of its technology and the difficulty of its engineering. The single braided steel cable with a diameter of only 0.35mm suspends the RM 56-02 tourbillon movement made of grade 5 titanium alloy in the center of the sapphire crystal case. Richard Mille RM056-02 KV Factory Skeleton Dial Replica Watch. The steel cable passes through a transparent space and is tightened and fixed by four pulleys at the corner of the movement and six pulleys at the periphery of the movement. The tension of the steel cable is controlled by the tension device at the 9 o’clock position. The entire cable device is then connected to the tension indicator at the 12 o’clock position so that the wearer can easily check the cable tension to confirm that it just meets the timing performance requirements. The upper and lower bezel of the dial are treated with anti-glare, using two transparent nitrile rubber O-ring seals and assembled with 24 grade 5 titanium alloy spline screws, with a waterproof depth of 30 meters.